Fasensor - Revision history

Reset: /* Rasberry */

2019-09-18T14:28:20Z

Rasberry

← Older revision		Revision as of 14:28, 18 September 2019
Line 359:		Line 359:
	sleep 1		sleep 1

	curl -i -H "Accept: application/json" -H "Content-Type: application/json" 'https://futuragora.pt/futurai/opensenses/fasensor21/~~getsend~~.php?hum='$fa21h'&temp='$fa21t''		curl -i -H "Accept: application/json" -H "Content-Type: application/json" 'https://futuragora.pt/futurai/opensenses/fasensor21/getaasdasdsenasddax.php?hum='$fa21h'&temp='$fa21t''


	</pre>		</pre>


	==Libraries==		==Libraries==

Reset at 14:22, 18 September 2019

2019-09-18T14:22:52Z

← Older revision		Revision as of 14:22, 18 September 2019
Line 341:		Line 341:


	==~~Code~~==		==Rasberry==

			<pre>
			echo "FASensor IoT"
			fa21t=$(/home/pi/Adafruit_Python_DHT/examples/AdafruitDHT.py 11 4 \| awk '$1 {print $1}' \| awk '$1 {print $1}' RS="Temp=" \| awk '$1 {print $1}' RS="*")
			echo "Temperatura: "$fa21t
			export fa21t=$fa21t
			sleep 4
			fa21h=$(/home/pi/Adafruit_Python_DHT/examples/AdafruitDHT.py 11 4 \| awk '$1 {print $2}' \| awk '$1 {print $1}' RS="Humidity=" \| awk '$1 {print $1}' RS="%" \| awk -F '.' '{print $1}')
			echo "Humidade: "$fa21h
			export fa21h=$fa21h

			report21="FAS21: "$fa21t" C \| Humidade: "$fa21h"%"
			export report21=$report21
			echo $report21
			python ./fasensor21irc.py
			sleep 1

			curl -i -H "Accept: application/json" -H "Content-Type: application/json" 'https://futuragora.pt/futurai/opensenses/fasensor21/getsend.php?hum='$fa21h'&temp='$fa21t''


			</pre>


	==Libraries==		==Libraries==

Reset: /* Fasensor Code */

2018-08-13T14:57:26Z

Fasensor Code

← Older revision		Revision as of 14:57, 13 August 2018
Line 22:		Line 22:
	==Fasensor Code==		==Fasensor Code==
	<pre>		<pre>
	//~~Fathing2~~		//FA Sensor 2 V2.0.1 4/8/2018 msantos 13/08/2018 reset
			#include <avr/wdt.h>
	#include <Wire.h>		#include <Wire.h>
	#include <Adafruit_BMP085.h>		#include <Adafruit_BMP085.h>
	#include "DHT.h"		#include "DHT.h"
			#include <SPI.h>
			#include <Ethernet.h>
	#define DHTPIN A1// what digital pin we're connected to		#define DHTPIN A1// what digital pin we're connected to
	// Uncomment whatever type you're using!		// Uncomment whatever type you're using!
Line 38:		Line 41:
	DHT dht(DHTPIN, DHTTYPE);		DHT dht(DHTPIN, DHTTYPE);
	Adafruit_BMP085 bmp;		Adafruit_BMP085 bmp;
	~~#include <SPI.h>~~
	~~#include <Ethernet.h>~~
	// Enter a MAC address for your controller below.		// Enter a MAC address for your controller below.
	byte mac[] = { 0xFE, 0xED, 0xCE, 0xEF, 0xCE, 0xED };		byte mac[] = { 0xFE, 0xED, 0xCE, 0xEF, 0xCE, 0xED };
	//IPAddress server(74,125,232,128); // numeric IP for Google (no DNS)		//IPAddress server(74,125,232,128); // numeric IP for Google (no DNS)
	char server[] = "api.thingspeak.com";		char server[] = "api.thingspeak.com";
	// Set the static IP address to use if the DHCP fails to assign		// Set the static IP address to use if the DHCP fails to assign
	IPAddress ip(192,168,1,110);		IPAddress ip(192,168,1,110);
	// Initialize the Ethernet client library		// Initialize the Ethernet client library
	// with the IP address and port of the server		// with the IP address and port of the server
	// that you want to connect to (port 80 is default for HTTP):		// that you want to connect to (port 80 is default for HTTP):
	EthernetClient client;		EthernetClient client;
	~~#include <Wire.h>~~		unsigned long LastTimeRun = 0; // Last time inverter analysis has run
			/// const int BatVoltagePin = A0;
			///float BatVoltage ;
			///int Namostras = 10; // number of samples
			///int VPinMedio;


	void setup() {		void setup() {
	Serial.begin(9600);		Serial.begin(9600);
			Serial.println(F("FA Sensor serial at 9600"));
			Serial.println(F("created by futuragora.pt"));
			Serial.println("");
	if (!bmp.begin()) {		if (!bmp.begin()) {
	Serial.println("Could not find a valid BMP085 sensor, check wiring!");		Serial.println(F("Could not find a valid BMP085 sensor, check wiring!"));
	while (1) {}		while (1) {}
	}		}
Line 63:		Line 73:
	}		}
	if (Ethernet.begin(mac) == 0) {		if (Ethernet.begin(mac) == 0) {
	Serial.println("Failed to configure Ethernet using DHCP");		Serial.println(F("Failed to configure Ethernet using DHCP"));
	// no point in carrying on, so do nothing forevermore:		// no point in carrying on, so do nothing forevermore:
	// try to congifure using IP address instead of DHCP:		// try to congifure using IP address instead of DHCP:
Line 69:		Line 79:
	}		}
	delay(1000); // give the Ethernet shield a second to initialize:		delay(1000); // give the Ethernet shield a second to initialize:
	Serial.println("~~connecting~~...");		Serial.println(F("Testing IP connection..."));
	~~dht.begin(~~);
	// if you get a connection, report back via serial:		// if you get a connection, report back via serial:
	if (client.connect(server, 80)) {		if (client.connect(server, 80)) {
	Serial.println("~~conection~~ test");		Serial.println("Conection test: OK");
	Serial.println("~~disconnecting~~.");		Serial.println("Disconnecting.");
	client.stop();		client.stop();
	}		}
	else {		else {
	Serial.println("connection failed"); // kf you didn't get a connection to the server:		Serial.println("connection failed"); // kf you didn't get a connection to the server:

	}		}
	}		dht.begin();
	void loop()		}
			void loop()
	{		{
			if ((LastTimeRun + 360000) < millis())
			{ // Main routine running each 60 seconds
			LastTimeRun = millis();
	float h = dht.readHumidity();		float h = dht.readHumidity();
	{		{
	if (client.connect(server, 80)) {		if (client.connect(server, 80)) {
	// sendig data to server		// sendig data to server
	// Serial.println("~~connected send~~");
	client.print("GET https://api.thingspeak.com/update?api_key=~~6ZRPREC014UE3CG4~~&");		Serial.println(F(""));
	client.print("field1=");		Serial.println(F("-----------------------------"));
			Serial.print(F("Connected: "));
			Serial.println(Ethernet.localIP());
			Serial.println(F("Sending to ... FASensor1 "));
			Serial.println(F(""));
			client.print("GET https://api.thingspeak.com/update?api_key=TESTKEY&");
			client.print("field1=");
	client.print(bmp.readTemperature());		client.print(bmp.readTemperature());
	client.print("&&");		client.print("&&");
Line 98:		Line 117:
	client.print("field3=");		client.print("field3=");
	client.print(dht.readHumidity());		client.print(dht.readHumidity());
	client.println();		/// client.print("&&");
			/// client.print("field4=");
			/// client.print(12.4);
			client.println();
	client.println();		client.println();
	~~// disconnecting from server~~
	~~// Serial.println("disconnecting. send");~~
	client.stop();		client.stop();

			Serial.print(F("Temperature = "));
			Serial.print(bmp.readTemperature());
			Serial.println(F(" oC "));
			Serial.print(F("Pressure = "));
			Serial.print(bmp.readPressure());
			Serial.println(F(" "));
			Serial.print(F("Humidity = "));
			Serial.print(dht.readHumidity());
			Serial.println(F(" "));
			Serial.println(F(""));
			Serial.println(F("Finish sending, disconnecting."));
			Serial.println(F("-----------------------------"));
			Serial.println(F(" "));
	}		}
	else {		else {
	Serial.println("connection failed");		Serial.println(F("connection failed"));
	}
	}		}
	{		}
	~~delay(59550); // 1 mn de delay~~		}
	}		}
	}


	</pre>		</pre>

Reset: /* Libraries */

2018-08-13T13:47:07Z

Libraries

← Older revision		Revision as of 13:47, 13 August 2018
Line 313:		Line 313:

	https://github.com/roltel/arduino-hub/tree/master/libraries/Adafruit_BMP085		https://github.com/roltel/arduino-hub/tree/master/libraries/Adafruit_BMP085

			Arduino Hub - https://github.com/roltel/arduino-hub

	==PHP Code Arduino Mysql==		==PHP Code Arduino Mysql==

Reset: /* Libraries */

2018-07-25T22:00:07Z

Libraries

← Older revision		Revision as of 22:00, 25 July 2018
Line 312:		Line 312:
	https://github.com/adafruit/Adafruit_Sensor		https://github.com/adafruit/Adafruit_Sensor

			https://github.com/roltel/arduino-hub/tree/master/libraries/Adafruit_BMP085

	==PHP Code Arduino Mysql==		==PHP Code Arduino Mysql==

Reset: /* Code Test sensors */

2018-07-25T21:57:00Z

Code Test sensors

← Older revision		Revision as of 21:57, 25 July 2018
Line 19:		Line 19:

	<html><img src="https://futuragora.pt/wiki/images/Fasensor_bb.jpg" alt="Be the change!" align="center" height="400" ></html>		<html><img src="https://futuragora.pt/wiki/images/Fasensor_bb.jpg" alt="Be the change!" align="center" height="400" ></html>

			==Fasensor Code==
			<pre>
			//Fathing2
			#include <Wire.h>
			#include <Adafruit_BMP085.h>
			#include "DHT.h"
			#define DHTPIN A1// what digital pin we're connected to
			// Uncomment whatever type you're using!
			//#define DHTTYPE DHT11 // DHT 11
			#define DHTTYPE DHT11 // DHT 22 (AM2302), AM2321
			// Connect VCC of the BMP085 sensor to 3.3V (NOT 5.0V!)
			// Connect GND to Ground
			// Connect SCL to i2c clock - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 5
			// Connect SDA to i2c data - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 4
			// EOC is not used, it signifies an end of conversion
			// XCLR is a reset pin, also not used here
			DHT dht(DHTPIN, DHTTYPE);
			Adafruit_BMP085 bmp;
			#include <SPI.h>
			#include <Ethernet.h>
			// Enter a MAC address for your controller below.
			byte mac[] = { 0xFE, 0xED, 0xCE, 0xEF, 0xCE, 0xED };
			//IPAddress server(74,125,232,128); // numeric IP for Google (no DNS)
			char server[] = "api.thingspeak.com";
			// Set the static IP address to use if the DHCP fails to assign
			IPAddress ip(192,168,1,110);
			// Initialize the Ethernet client library
			// with the IP address and port of the server
			// that you want to connect to (port 80 is default for HTTP):
			EthernetClient client;
			#include <Wire.h>

			void setup() {
			Serial.begin(9600);
			if (!bmp.begin()) {
			Serial.println("Could not find a valid BMP085 sensor, check wiring!");
			while (1) {}
			}

			while (!Serial) {
			; // wait for serial port to connect. Needed for Leonardo only
			}
			if (Ethernet.begin(mac) == 0) {
			Serial.println("Failed to configure Ethernet using DHCP");
			// no point in carrying on, so do nothing forevermore:
			// try to congifure using IP address instead of DHCP:
			Ethernet.begin(mac, ip);
			}
			delay(1000); // give the Ethernet shield a second to initialize:
			Serial.println("connecting...");
			dht.begin();
			// if you get a connection, report back via serial:
			if (client.connect(server, 80)) {
			Serial.println("conection test");
			Serial.println("disconnecting.");
			client.stop();
			}
			else {
			Serial.println("connection failed"); // kf you didn't get a connection to the server:

			}
			}
			void loop()
			{
			float h = dht.readHumidity();
			{
			if (client.connect(server, 80)) {
			// sendig data to server
			// Serial.println("connected send");
			client.print("GET https://api.thingspeak.com/update?api_key=6ZRPREC014UE3CG4&");
			client.print("field1=");
			client.print(bmp.readTemperature());
			client.print("&&");
			client.print("field2=");
			client.print(bmp.readPressure());
			client.print("&&");
			client.print("field3=");
			client.print(dht.readHumidity());
			client.println();
			client.println();
			// disconnecting from server
			// Serial.println("disconnecting. send");
			client.stop();
			}
			else {
			Serial.println("connection failed");
			}
			}
			{
			delay(59550); // 1 mn de delay
			}
			}
			</pre>

	==Code Test sensors==		==Code Test sensors==

Reset at 21:03, 21 July 2018

2018-07-21T21:03:01Z

@@ Line 158: / Line 158: @@
 Create a database with three tables: temperature, humidity, pressure. Use the following code:
 <pre>
 </pre>
 Add 2 files to your server: connect.php and add.php:
@@ Line 193: / Line 222: @@
 Create Table:

Reset: /* Componentes */

2018-07-21T21:02:15Z

Componentes

← Older revision		Revision as of 21:02, 21 July 2018
Line 18:		Line 18:
	DHT11		DHT11

	<html~~><br~~><img src="https://futuragora.pt/wiki/images/Fasensor_bb.jpg" alt="Be the change!" align="~~left~~" height="~~350~~" ~~><br~~></html>		<html><img src="https://futuragora.pt/wiki/images/Fasensor_bb.jpg" alt="Be the change!" align="center" height="400" ></html>

	==Code Test sensors==		==Code Test sensors==

Reset at 21:01, 21 July 2018

2018-07-21T21:01:48Z

Show changes

Reset at 18:46, 21 July 2018

2018-07-21T18:46:38Z

Show changes